computer not turning on power supply ok

Doublecheck everything is seated properly, RAM, GPU, etc. Ok so apparently the POWER SW cable was hanging there and i plugged it in and boom pc boot up, this is with the old psu. I will try to put the new one in and let you know whats up later. Yep, installed the new PSU and everything is working as it should. Makesure about the power cords first and then attempt the rest. to stop the guessing game, do the following, disconnect all the power cords from the GPU, connect the screen to the GPU. Power on and see whether the GPU even lights up and on the screen it should request you to plug in the PCIe Power connectors (you'll see a visual) ThePaladin. if you do a full shutdown of your system you can unplug the power cord from the wall, should not affect a quality power supply (desktop) plugging it back into the wall afterwards, if you mean you do this a lot, I would suggest turning the power supply switch off, because repeated plug unplugging can possible cause a "jolt" of Usuallythe power on switch itself is shot. One way to test it, follow the ribbon connector or wires from the switch to where it attaches to the motherboard. Disconnect the connector from the Thepower supply shall not latch into a shutdown state when PS_ON# is driven active by pulses between 10ms to 100ms during the decay of the power rails. If you really want to use this to control a computer, you could steal that pin away from the motherboard (instead of power supply->mobo it goes power supply->yobo). Lừa Đảo Vay Tiền Online.

computer not turning on power supply ok